Interfaces
3.6 PROFIBUS DP interfaces
SIMOTION D4x5
54 Manual, 02/2012
Connectable devices
The following devices can be connected to the PROFIBUS DP interfaces:
● PG / PC
● SIMATIC HMI devices
● SIMATIC S7 controllers with PROFIBUS DP interface
● Distributed I/O
● Teleservice adapter
● Drive units with PROFIBUS DP interface (standard slaves)
Note
A teleservice adapter can only be connected to one of the two interfaces.
A detailed, regularly updated list of the modules approved for use with SIMOTION, as
well as notes on their use, can be found on the Internet at
(http://support.automation.siemens.
com/WW/view/en/11886029):
Take note of the documentation on the individual modules or devices!
To Next Page
Loading...
