Siemens SINAMICS G120C User Manual

Rated motor voltage
Rated motor current
Rated motor power
Rated motor frequency
Rated motor speed
Motor cooling:
• : Natural cooling
• : Forced-air cooling
• : Liquid cooling
• : Without fan
Select the basic setting for the motor control:
• : Constant load
• : Speed-dependent load
Select the default setting for the interfaces of the converter that is suitable for your
application.
Default setting of the interfaces (Page92)
6HWSRLQW
S
S
Q
Figure5-5 Minimum and maximum motor speed
Q
6HWSRLQW
S
S
W
Q
PD[
S
Figure5-6 Ramp-up and ramp-down time of the motor
Ramp-down time after the OFF3 command
Commissioning
5.4Quick commissioning using the BOP-2 operator panel
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 129

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating