Siemens SINAMICS G120C User Manual

Installing
4
4.1 Installing the label for the North American market
Description
Figure4-1 Adhesive label with danger and warning notes for North America
The converter is supplied with an adhesive label with danger and warning notes for the
North American market.
Attach the adhesive label in the required language to the inside of the control cabinet where
it is clearly visible at all times.
4.2 EMC-compliant setup of the machine or plant
The converter is designed for operation in industrial environments where strong
electromagnetic 󹪝elds are to be expected.
Reliable and disturbance-free operation is only ensured for EMC-compliant installation.
To achieve this, subdivide the control cabinet and the machine or system into EMC zones:
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 39

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating