Siemens SINAMICS G120C User Manual

11.11.4 Sine-wave 󹪝lter
Preconditions for using a sine-wave 󹪝lter:
• Maximum permissible output frequency of the converter: 150Hz
• Converter pulse frequency: 4kHz
The assignment of a suitable sine-wave 󹪝lter to the converter is provided in the following
Chapter:
Optional components (Page34)
Dimensions and mounting dimensions:
Mounting base components (Page46)
Table 11-23 Technical data of the sine-wave 󹪝lter as footprint component
Article no. 6SE6400-3TD00-4AD0 
Power loss at 50/60 Hz 25W 
Degree of protection IP20 
Weight 0.8kg 
Technical data
11.11Accessories
SINAMICS G120C Converters
444 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating