Siemens SINAMICS G120C User Manual

Parameter Description Factory setting
r2123[0…63] Alarm time received in milliseconds - ms
r2124[0…63] Alarm value -
r2125[0…63] Alarm time removed in milliseconds - ms
r2132 CO: Actual alarm code -
r2134[0…63] Alarm value for 󹪞oat values -
Extended settings for alarms
Parameter Description Factory setting
You can change up to 20 di󹪜erent alarms into a fault or suppress alarms:
p2118[0…19] Change message type, message number 0
p2119[0…19] Change message type, type 1
You will 󹪝nd details in function diagram 8075 and in the parameter description of the List
Manual.
Alarms, faults and system messages
9.3Alarms, alarm bu󹪜er, and alarm history
SINAMICS G120C Converters
368 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating