Siemens SINAMICS G120C User Manual

You have removed the roof-mounted fan.
❒
Installing the roof-mounted fan
Procedure
1. Align the power supply connection of the roof-mounted fan to the connector in the
converter.
2. Carefully insert the roof-mounted fan into the converter until it engages in the converter
housing.
3. Switch on the power supply for the converter.
You have installed the roof-mounted fan.
❒
Corrective maintenance
10.4Spare parts
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 409

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating