Siemens SINAMICS G120C User Manual

 Function SINAMICS
   G120 G120D
4 Modbus RTU:
The converter supports the combination "1 stop bit" and "no parity".
- - ✓ ✓ ✓ ✓ ✓ - -
5 EtherNet/IP:
When selecting the ODVA AC/DC drive pro󹪝le, although telegram 1 is pre‐
de󹪝ned, it can be extended to include additional process data.
The EDS 󹪝le has been extended accordingly by a telegram with a length of 6
words.
More information is provided in the "Fieldbuses" Function Manual.
"Fieldbus" function manual (https://
support.industry.siemens.com/cs/ww/en/view/109751350)
EDS (https://support.industry.siemens.com/cs/ww/de/view/78026217)
✓ ✓ ✓ ✓ - ✓ ✓ ✓ ✓
Appendix
A.1New and extended functions
SINAMICS G120C Converters
450 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating