Siemens SINAMICS S120 - Page 237

Gearbox
9.3 Motors with helical and bevel gearboxes
Synchronous Motors 1FK7
Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
237
Overview of possible combinations of option Gxx with Hxx and Qxx
Qxx: New options, torque bracket
H2x: Construction type IM B7 for helical gearboxes
Gear type Permissible H options
Helical Offset
shaft
Bevel Worm Permissible
H option for
helical
Permissible
H option for
offset shaft
Permissible
H option for
bevel and
worm
Description of options Order code for option Gxx Order code for option Hxx
G11 Foot-mounted, solid shaft with fitted key H1x to H4x
G13 Footed-mounted, hollow shaft with keyway
(insertion gearbox side 4)
G14 Footed-mounted, hollow shaft with shrink disk
(insertion gearbox side 4)
G15 Foot-mounted, solid shaft with fitted key
(gearbox side 3)
G17 Footed-mounted, hollow shaft with keyway
(insertion gearbox side 3)
G18 Footed-mounted, hollow shaft with shrink disk
(gearbox side 3)
G21 Tapped hole group, solid shaft with keyway
(gearbox side 4 for bevel and worm)
1)
H1x, H6x, H8x H1x to H6x
G23 Tapped hole group, solid shaft with keyway
(insertion gearbox side 5 for offset shaft,
insertion gearbox side 4 for bevel and worm)
1)
H1x to H6x H1x to H6x,
Qxx
G24 Tapped hole group, hollow shaft with tensioning
element (shrink disk on gearbox side 6 and inser-
tion side 5 for offset shaft; shrink disk on gearbox
side 4 and insertion side 3 for bevel and worm)
1)
G25 Tapped hole group, solid shaft with fitted key
(gearbox side 3)
1)
H1x to H6x
G27 Tapped hole group, hollow shaft with fitted key
(insertion gearbox side 3)
1)
H1x to H6x,
Qxx
G28 Tapped hole group, hollow shaft with tensioning
element (shrink disk on gearbox side 3 and inser-
tion side 4 for bevel and worm)
1)
G31 Flange (round), solid shaft with fitted key
(gearbox side 5 for offset shaft;
side 4 for bevel and worm)
1)
H1x, H5x, H6x H1x to H6x H1x to H6x
G33 Flange (round), hollow shaft with keyway
(insertion gearbox side 4)
1)
G34 Flange (round), hollow shaft with tensioning ele-
ment, shrink disk on gearbox side 6 and insertion
side 5 for offset shaft; shrink disk on gearbox side
4 and insertion side 3 for bevel and worm)
1)
G35 Flange (round), solid shaft with fitted key
(gearbox side 3)
1)
G37 Flange (round), hollow shaft with keyway
(insertion gearbox side 3)
1)
G38 Flange (round), hollow shaft with tensioning ele-
ment (shrink disk on gearbox side 3 and insertion
side 4 for bevel and worm)
1)
1)
Not for worm gear size S002 (E0x).