EasyManua.ls Logo

Siemens SINAMICS S120 - Dimensioning of Braking Resistors

Siemens SINAMICS S120
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Motor components
6.4 Brake resistances (armature short-circuit braking)
Synchronous Motors 1FK7
Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
87
6.4.4 Dimensioning of braking resistors
The correct dimensioning ensures an optimum braking time. The braking torques which are
obtained are also listed in the tables. These data apply to braking operations from the rated
speed and moment of inertia J
external
= J
mot
. If the drive is braked from another speed, then
the braking time cannot be proportionally reduced. However, longer braking times cannot
occur if the speed at the start of braking is less than the rated speed.
The data in the following table is calculated for rated values according to the data sheet.
The variance during production as well as iron saturation have not been taken into account
here. Higher currents and torques can occur than those calculated as a result of the
saturation.
Table 6-15 Dynamic braking for 1FK7 CT
Average braking torque
M
br rms
[Nm]
RMS braking current
I
br rms
[A]
Motor type Braking
resistor,
external
R
opt
[Ω]
Without
external
braking
resistor
With external
braking
resistor
Max. braking
torque M
br max
[Nm]
Without
external
braking
resistor
With external
braking
resistor
1FK7011-5AK71 2.3 0.13 0.14 0.17 2.5 2.3
1FK7015-5AK71 6.2 0.23 0.28 0.35 2.6 2.3
1FK7022-5AK71 4.1 1.0 1.2 1.5 5.9 5.4
1FK7032-5AK71 15.7 0.7 1.1 1.4 3.7 3.4
1FK7034-5AK71 12.7 1.3 2.0 2.5 5.5 4.9
1FK7040-5AK71 20.1 0.4 0.9 1.1 3.2 2.9
1FK7042-5AF71 16.4 1.3 2.2 2.7 3.6 3.2
1FK7042-5AK71 9.0 0.9 2.2 2.7 7.5 6.7
1FK7060-5AF71 8.8 1.8 4.0 5.0 7.2 6.4
1FK7060-5AH71 6.9 1.5 4.1 5.2 10.3 9.2
1FK7063-5AF71 4.8 3.3 8.2 10.2 14.0 12.5
1FK7063-5AH71 3.4 2.5 7.9 9.8 20.5 18.3
1FK7080-5AF71 10.0 2.0 5.5 6.8 8.1 7.2
1FK7080-5AH71 6.7 1.5 5.6 6.9 12.3 11.0
1FK7083-5AF71 3.6 4.9 13.7 17.0 21.2 19.0
1FK7083-5AH71 3.0 2.8 12.5 15.5 28.0 25.0
1FK7100-5AF71 4.1 4.1 13.2 16.4 19.6 17.5
1FK7101-5AF71 2.1 5.6 20.6 25.7 34.4 30.8
1FK7103-5AF71 1.4 7.3 28.3 35.1 49.4 44.2
1FK7105-5AC71 1.8 15.2 44.5 55.3 44.2 39.6
1FK7105-5AF71 1.2 11.9 45.9 57.0 68.9 61.6

Table of Contents

Other manuals for Siemens SINAMICS S120

Related product manuals