Siemens SINAMICS Startdrive - Online Parameter View

Parameterizing the drive
7.7 Online parameter view
Getting Started - SINAMICS Startdrive
42 Getting Started, 01/2015
7.7
Online parameter view
Working online with the parameter view
In the parameter view, you can change the parameter values directly in the drive when you
are connected online to the drive.
To go online with the parameter view:
1. Switch to online mode in the parameter view. The input fields that can be changed are
displayed in orange.
2. Parameter changes in the online view only affect the drive. If you want to take the
changes into the offline project, you must perform an upload to the project.