Siemens SINAMICS Startdrive - Changing the IP and Name via Accessible Nodes

Drive with control via PROFINET
8.5 Changing the IP and name via Accessible nodes
Getting Started - SINAMICS Startdrive
48 Getting Started, 01/2015
8.5
Changing the IP and name via Accessible nodes
Changing the IP address and name
You can change the IP and the name under "Online & diagnostics". We demonstrate this
below using a drive as an example. The procedure for the controller is identical.
How to change the IP and/or the name
1. Open "Online & diagnostics" on the drive or the controller.