Safety Integrated
9.3 Selecting the safety functionality in the Startdrive
Getting Started - SINAMICS Startdrive
Getting Started, 01/2015
67
Selecting the safety functionality in the Startdrive
Safety functionality
To edit the safety functions, you must first select the appropriate safety functionality.
1. Click "Select safety functionality" below "Drive functions" > "Safety Integrated" in the
"Function view" tab.
2. In the opened window, you can choose between "Basic functions" and "Extended
functions" depending on the type of the drive device.
Figure
9-1 Selecting the safety functionality
3. After selecting the safety functionality, the possible safety functions are displayed in the
secondary navigation and in the project window where they can be configured.
To Next Page
Loading...
