Siemens SINAMICS Startdrive - Checking IP and Names of Devices via Accessible Nodes

Drive with control via PROFINET
8.4 Checking the IP and names of the devices via Accessible nodes
Getting Started - SINAMICS Startdrive
Getting Started, 01/2015
47
8.4
Checking the IP and names of the devices via Accessible nodes
IP address and name of the node
The nodes must have a unique IP address and a PROFINET device name for PROFINET
communication.
How to display the current IP and name of the nodes
1. The current IP addresses can be read next to the device with Online access. You will
then use this IP later when configuring the hardware.
Next we will show you how to change the IP and the name.