Services, Diagnosis and Data Saving
5-2 SINUMERIK 801
Start-Up
Fig. 5-2 RS232 text file screen (after entering machine tool
manufacturer-specific password)
In this screen, pressing softkey “show” can display “Main/Sub part
programs…” or “Data…” and therefore execute corresponding data transfers.
Communication tool The RS232 communication tool WinPCIN shall be loaded onto the PC (you may
download corresponding tool on website at www.ad.siemens.com.cn/download/
)
and baudrate be set as 9600. For detailed information about baudrate setting
and softeware tool version, see Fig. 5-3 and 5-4 below.
Fig. 5-3
To Next Page
Loading...
