Siemens SINUMERIK 802C - Technical Appendix: Machine and Setting Data; Display Machine Data

6-94
SINUMERIK 802C
6FC5 597–3AA20–0BP2 (01.02)
Technical Appendix
6.1 List of machine and setting data
Data type
BOOLEAN Machine data bit (1 or 0)
BYTE Integer values (from -128 to 127)
DOUBLE Real and integer values
(from " 4.19  10
-307
to " 1.67  10
308
)
DWORD Integer values (from -2.147  10
9
to 2.147  10
9
)
STRING Character string (max. 16 characters) consisting of
upper-case letters with digits and underscore
UNSIGNED WORD Integer values (from 0 to 65536)
SIGNED WORDInteger values (from -32768 to 32767)
UNSIGNED DWORD Integer values (from 0 to 4294967300)
SIGNED DWORD Integer values (from -2147483650 to 2147483649)
WORD Hex values (from 0000 to FFFF)
DWORD Hex values (from 00000000 to FFFFFFFF)
FLOAT DWORDReal values (from "8.43  10
-37
to "3.37  10
38)
6.1.1 Display machine data
Number MD Name
Representation Name, Miscellaneous Activated User Class w/r
Unit Standard value Minimum value Maximum value Data type
202 $MM_FIRST_LANGUAGE
Decimal Foreground language Power On 2/3
0 1 1 2 Byte
203 $MM_DISPLAY_RESOLUTION
Decimal Display resolution Power On 2/3
0 3 0 5 Byte
206 $MM_USER_CLASS_WRITE_TOA_GEO
Decimal User class Write tool geometry Immediately 2/3
0 3 0 7 Byte
207 $MM_USER_CLASS_WRITE_TOA_WEAR
Decimal User class Write tool wear data Immediately 2/3
0 3 0 7 Byte
6