Detailed Description
2.4 Tool: Tool radius compensation 2D (TRC)
Tool Compensation (W1)
2-62 Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Machine data:
MD20220 $MC_CUTCOM_MAX_DISC (maximum value for DISC)
can be used to define the maximum value that can be programmed with DISC.
Values greater than 50 are generally not advisable with DISC.
&RQLFVHFWLRQ
&LUFOH
&RQWRXUDQJOH
',6&
',6&
',6&
Fig. 2-27 Example: Overshoot with DISC=25
65VFDOHGRYHUVKRRWZLWKUHIHUHQFHWRWKHWRROUDGLXV
6WUDYHUVHRYHUVKRRW5UDGLXV
&RQWRXUDQJOH>GHJUHHV@
',6&
65
',6&
Fig. 2-28 Overshoot with DISC depending on contour angle
To Next Page
Loading...
Need help?
General
