Detailed Description
2.4 Referencing with incremental measurement systems
Reference Point Approach (R1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
2-7
2.4.2 Phase 1: Traversing to the reference cam
Phase 1: Graphic representation
'%'%;GHFHOHUDWLRQRIUHIHUHQFHSRLQWDSSURDFK
'%'%;PRWLRQFRPPDQGSOXV
'%'%;PRWLRQFRPPDQGPLQXV
'%'%;DQGWUDYHUVLQJNH\SOXVPLQXV
'%'%;DQGUHIHUHQFHGV\QFKURQL]HG
=HURPDUNSRVLWLRQPHDVXULQJV\VWHP
9HORFLW\
UHIHUHQFHSRLQWDSSURDFKYHORFLW\
UHIHUHQFHSRLQWFUHHSYHORFLW\
UHIHUHQFHSRLQWSRVLWLRQLQJYHORFLW\
3KDVH
0'0$B5()3B9(/2B6($5&+B&$0
0'0$B5()3B9(/2B6($5&+B0$5.(5
0'0$B5()3B9(/2B326
W
Fig. 2-2 Phase 1: Traversing to the reference cam
Phase 1: Start
For information on starting reference point approach, refer to "Axis-specific referencing" and
"Channel-specific referencing."
Phase 1: Sequence
In phase 1, depending on the position of the machine axis with reference to the homing cam,
we distinguish between three cases:
1. The machine axis is positioned before the reference cam
2. The machine axis is positioned on the reference cam
3. The machine axis has no reference cam
To Next Page
Loading...
Need help?
General
