Punching and nibbling
12.1 Activation, deactivation
Job planning
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
12-3
Punching and nibbling with leader, PONS/SONS
Punching and nibbling with a leader is not possible in more than one channel
simultaneously. PONS or SONS can only be activated in one channel at a time.
If PONS or SONS is activated in more than one channel at a time, alarm 2200 "Channel %1
fast punching/nibbling not possible in several channels" detects this impermissible action.
Otherwise, PONS and SONS work in exactly the same way as PON and SON.
Travel-dependent acceleration PUNCHACC
The PUNCHACC(S
min
,A
min
, S
max
, A
max
) language command defines an acceleration
curve that can define different accelerations (A) depending on the hole spacing (S).
Example for PUNCHACC(2, 50, 10, 100):
Distance between holes less than 2 mm:
Traversal acceleration is 50% of maximum acceleration.
Distance between holes from 2 mm to 10 mm:
Acceleration is increased to 100%, proportional to the spacing.
Distance between holes more than 10 mm:
Traverse at an acceleration of 100%.
To Next Page
Loading...
Need help?
General
