Glossary
Job planning
Glossary-22 Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
Workpiece contour
Set contour of the → workpiece to be created or machined.
Workpiece coordinate system
The workpiece coordinate system has its starting point in the → workpiece zero. In machining
operations programmed in the workpiece coordinate system, the dimensions and directions
refer to this system.
Workpiece zero
The workpiece zero is the starting point for the → workpiece coordinate system. It is defined
in terms of distances to the → machine zero.
To Next Page
Loading...
