Siemens SINUMERIK 840D sl OP 010

To Next Page

To Previous Page

# At system runtime, the system resolution is automatically

# adapted to the resolution of that panel which

# currently owns the focus.

# AdaptResolution disabled:

# The system resolution is set at system startup phase.

# At system runtime, system resolution remains unchanged

# whichever resolution the currently focused panel owns.

# (0=DISABLE, 1=ENABLE)

AdaptResolution=1

# COLOR DEPTH

# The value the system color depth is set at system

# startup phase

# ColorDepth SYSTEM:

# System color depth remains unchanged whichever value

# the color depth is currently set to.

# COlorDepth 16_BIT

# System color depth is set to 16 bit.

# COlorDepth 32_BIT

# System color depth is set to 32 bit.

# (0=SYSTEM, 1=16_BIT, 2=32_BIT)

ColorDepth=1

# INIT TIMEOUT

# Guaranteed time period (in sec) the HMI manager waits

# for VNC server initialization.

InitTimeout=300

# PCU STARTUP TIMEOUT

# Attention: The parameter is only provided for a PCU

# configuration with local attached OP !

# The startup phase is completed if this timeout period

# has passed and no registration of a TCU has been car-

# ried out at this time.

General information and networking

1.4 Networking

Operator panel front: OP 010

Manual, 07/2018, A5E36371538B 67

Siemens SINUMERIK 840D sl OP 010 - Page 67