Description
2
The SINUMERIK OP 010 operator panel front has a 10.4" TFT color display with a resolution
of 640 x 480 pixels (VGA) and features a 62-key membrane keyboard (with 8 + 4 horizontal
softkeys and 8 vertical softkeys) that has been optimized for programming parts programs.
It is fixed from the rear using special clamps that are included in the delivery scope.
Validity
The description below applies to the OP 010 operator panel front.
Article number: 6FC5203-0AF00-0AA3
Features
● 19" mounting format, 7 HU (height units)
● Panel cutout (W x H): 450 x 290 mm
● Limited mounting depth
● 10.4" flat screen (color) with VGA resolution 640 x 480 pixels using TFT technology with
LED backlight
● Membrane keyboard with alphabetic, numeric, cursor, control and hotkey key groups
● Softkeys: 8 + 4 horizontal and 8 vertical softkeys
● Shift key for switchover to the second key level (not for switching over the letters, since
they are uppercase only)
● Front USB interface
● Degree of protection IP65
● Attachment: 12 tension jacks on the rear side
● Can be combined with PCU, TCU
Operator panel front: OP 010
Manual, 07/2018, A5E36371538B 89
To Next Page
Loading...
