Interfaces
4
This operator panel front has the following interfaces:
Front
USB 1.1 Full Speed (socket, type A) for connecting an external keyboard, mouse and USB
flash drive (see View (Page 91)).
Note
Note that the electromagnetic compatibility of commercially available peripheral devices
operated via the USB interface is usually rated for office use only.
For industrial use, components with a higher degree of certification are recommended.
Rear
● Two flat ribbon cables for connecting the PCU:
– I/O USB cable K1:
All signals that are used for the display interface and the connection of operator panel
fronts
(e.g. supply voltages)
– Display cable K2
● Interface X12 - reserved (under the cover plate)
① I/O USB cable K1
② Display cable K2
③ Interface X12 (reserved)
Figure 4-1 Connections on rear of housing: Connections to PCU
Operator panel front: OP 010
Manual, 07/2018, A5E36371538B 95
To Next Page
Loading...
