Siemens SINUMERIK 840D sl TCU 30.3 - Mounting the TCU on the Operator Panel Front Without Mounting Bracket

The K1, K2 interfaces are suitable only for connecting operator panel fronts OP 010, OP
010S, OP 010C, OP 012, OP 015, OP 015A and TP 015A. The K3 interface is suitable only for
connecting the OP 019 control panel front.
View


9 9
① X203/X204 Double USB interface 1
② X212/X213 Double USB interface 2
③ X202 Ethernet interface
④ X205 Interface for direct keys
⑤ X206 24VDC power supply
⑥ - Protective conductor connection
Figure3-3 Front view of the TCU30.3 with interfaces
Description
3.3Interfaces
TCU 30.3
Equipment Manual, 03/2023, A5E40874197B AD 23