Siemens SINUMERIK 840D sl TCU 30.3 Equipment Manual

precise details on the reason for the loss of function. With more favorable scenarios, the
session name for the VNC server will also be speci󹪝ed along with its resolution.
The connection and HMI status are monitored on a regular basis in the background. This may
mean that these speci󹪝cations change spontaneously if a change is made on the relevant
server, e.g. it may be switched o󹪜, the HMI may become available, etc.
6.4.3 Operating the TCU menu "Service menu"
"Service menu for operator panel (TCU)" dialog
The following dialog appears when "Service this panel" is selected from the main menu:
Figure6-6 TCU menu: Service menu
Networking
6.4Service and diagnostics
TCU 30.3
Equipment Manual, 03/2023, A5E40874197B AD 63

Siemens SINUMERIK 840D sl TCU 30.3 Specifications

General

Brand	Siemens
Model	SINUMERIK 840D sl TCU 30.3
Category	Security Sensors
Language	English