Siemens SINUMERIK 840D sl TCU 30.3 Equipment Manual

Data matrix code on the nameplate
The data matrix code on the nameplate contains the speci󹪝c device data. This code can be read
with a smartphone and technical information about the device displayed via the "Industry
Online Support" mobile app.
1.7 Important product information
Using OpenSSL
This product can contain the following software:
• Software developed by the OpenSSL project for use in the OpenSSL toolkit
• Cryptographic software created by Eric Young.
• Software developed by Eric Young
You can 󹪝nd more information on the internet:
• OpenSSL (
https://www.openssl.org)
• Cryptsoft (https://www.cryptsoft.com)
Compliance with the General Data Protection Regulation
Siemens observes standard data protection principles, in particular the data minimization rules
(privacy by design).
For this product, this means:
The product does not process or store any personal data, only technical function data (e.g.
time stamps). If the user links this data with other data (e.g. shift plans) or if he/she stores
person-related data on the same data medium (e.g. hard disk), thus personalizing this data,
he/she must ensure compliance with the applicable data protection stipulations.
Introduction
1.7Important product information
TCU 30.3
Equipment Manual, 03/2023, A5E40874197B AD 9

Siemens SINUMERIK 840D sl TCU 30.3 Specifications

General

Brand	Siemens
Model	SINUMERIK 840D sl TCU 30.3
Category	Security Sensors
Language	English