Siemens SINUMERIK 840D sl TCU 30.3 - Service and Diagnostics; Using the Tcus Main Menu

Example:
[Station] 
maxhostindex=2 /* Number of nodes that are defined under
[host_1] and [host_2].
mcpIndex=192 
tcuIndex=1 
eksIndex=0 
[host_1] 
Address=192.168.214.1 /* Address of the NCU to which the
connection is established during booting.
[host_2] 
Address=157.163.230.202 /* Address of the PC
password=123456 /* Password of the VNC server on the PC
Switching over between the nodes
With the menu back key+MENUSELECT, the following actions are triggered:
• The TCU name is displayed in the header of the displayed window, e.g. TCU1.
• A selection list for connecting to the other nodes is displayed on the TCU.
6.4 Service and diagnostics
6.4.1 Using the TCU's main menu
Displaying the TCU menu
• With touch screens: Simultaneously touch the left-hand and right-hand lower corner of the
active display area with one 󹪝nger at a time.
• With connected keyboard: Press the menu back key and the<MENUSELECT> key
Networking
6.4Service and diagnostics
TCU 30.3
58 Equipment Manual, 03/2023, A5E40874197B AD