Installing
4.4 Transmitter installation (remote version)
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
21
4.4.2 Pipe or wall mounting with assembly bracket
Pipe mounting
1. Mount the assembly bracket on the pipe using the fastening brackets
2. Fasten the transmitter with the two screws provided.
Pipe mounting with assembly bracket
Wall mounting
1. Fasten the asembly bracket to the back of the transmitter
2. Fasten the transmitter and assembly bracket to the wall
Note
The fastening brackets and nuts are not needed for wall mounting.
154
105
Wall mounting with assembly bracket
To Next Page
Loading...
