Connecting
5.4 Step 3: Connecting terminal box and transmitter
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
27
5.4 Step 3: Connecting terminal box and transmitter
WARNING
The SITRANS F M Transmag 2 transducer may only be connected to measuring sensor for
alternating fields SITRANS F M 911/E .
The magnetic circuit carries dangerous mains voltage.
As long as the device is under voltage, the lid of the housing on the sensor connection area
may only be opened by qualified personnel.
Before removing the terminal cover, the auxiliary power must be switched off from all poles.
Following installation, the terminal cover must be screwed back on again.
To Next Page
Loading...
