Parameters
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
87
5.2.4 Device ID Clear device identification;
corresponds to HART long address
(device-specific
HART long
address)
1 ... 99 999 (Can only be
set with factory code by
HART)
5.2.5 Manuf. Date Transmitter manufacture date; form:
DDMMYY
(device-specific
manufacture
date)
DDMMYY (Can only be set
with factory code by
HART)
5.2.6 Sensor Input only possible if no data can be read
from SmartPLUG
5.2.6.1 Nom.Diameter
5
Diameter
Inside nominal diameter of the sensor with
probes: interior diameter of the
surrounding tube
(nominal width)
0.1 m
DN2 ... 2000 / 0.5 ... 80 in,
probe
(Only after ’Probe’ is
selected:) 0,1 ... 5 m
5.2.6.2 Product Type
4
Sensor order number (7ME5034
-xxxxx-xxA0)
from SmartPLUG
5.2.6.2 Analog
Transmag
5
Select ’Yes’ for measuring sensors with
an R100 constant
In this case, a CFH value must be entered
in the 6.7.2 menu according to the
following formula:
CFH = 176,715 * DN2/R100,
DN = nominal diameter in mm)
No
• No
• Yes
5.2.6.3 Serial Number
4
Serial number of sensor (serial number) From SmartPLUG
4)
Parameters apply only to devices with 20 mA/Hart communication and digital output 2 (7ME504x-0xxxx)
5)
Parameters apply only to devices with 20 mA/Hart communication and digital input (7ME504x-2xxxx)
Service
Table A- 6 Function group Service parameters
6.1 Enter Code Input of code number agreed under
"Customer Code" (menu 6.2) for releasing
local parameterization
0 0 ... 9999
(according to setting
under menu 6.2)
6.2 Customer Code Selection of personal code:
• Code 0: Parameters are not protected
by a code.
• Code >0: Parameters can only be
changed after entering the code under
"Enter Code" (menu 6.1)
0 0 ... 9999
6.3 Service Code Input of factory code for extended service
functions
0 0 ... 99999
6.4 Reset Device reset (without parameter changes) Cancel
• Cancel
• Reset
6.5 Control Values
6.5.1 Volt. Um
Volt. Uref
Control value for magnetic field current
Control value for reference voltage
6.5.2 Volt. Usig Electrode differential voltage
To Next Page
Loading...
