Table 2-5 Slot 1: Analog Input block - Mass flow
Index Parameter name Data type Access Annotation
16 BLOCK_OBJECT DS-32 Read
only
Constant block information
17 CURRENT_MODE Unsigned8 Read
only
8: Automatic
128: Out of service
22 PROCESS_VALUE DS-101 Read
only
Process value with quality code
23 PROCESS_VAL‐
UE_UNITS
Un‐
signed16
Read
only
Read-only copy of the transducer block unit setting
24 DAMPING Float32 Read /
write
Low-pass filter of the input value. Value in seconds. Valid
range: 0…100 s
25 SIMULATE DS-50 Read /
write
Possibility to simulate the PROCESS_VALUE parameter (in‐
cluding the quality code). This could be used to verify the
PLC program behavior.
26 INPUT_SELECTOR Un‐
signed16
Read /
write
Constant transducer reference information
27 VIEW_1 Read
only
Read-only parameter to read
● BLOCK_OBJECT
● CURRENT_MODE
● PROCESS_VALUE
● PROCESS_VALUE_UNITS
● DAMPING
● SIMULATE
Manufacturer Specific
37 PROCESS_VAL‐
UE_UNITS_TEXT
Visible‐
String(8)
Read
only
Table 2-6 Slot 1: Transducer Block
Index Parameter name Data type Access Annotation
68 BLOCK_OBJECT DS-32 Read Constant block information
69 CURRENT_MODE Un‐
signed8
Read Fixed to automatic (8)
74 VOLUME_FLOW 101 Read Volume flow
Communication
2.10 Acyclic communication
FCT030 Profibus (From firmware 4.0)
32 Function Manual, 06/2018, A5E39931906-AB
To Next Page
Loading...
