Index Parameter name Data type Access Annotation
81 MASS_FLOW_HI_LI
MIT
Float32 Read Mass flow high limit
82 DENSITY 101 Read Process value
83 DENSITY_UNITS Un‐
signed16
Read /
Write
Density unit
The coding is according the PROFIBUS PA Profile specification:
1097: kg/m³
1098: Mg/m³
1099: kg/dm³
1100: g/cm³
1101: g/m³
1102: t/m³
1103: kg/l
1104: g/ml
1105: g/l
1106: lb/in³
1107: lb/ft³
1108: lb/gal
1109: STon/yd³
1430: lb/i.gal
1558: mg/l
1559: µg/l
1564: mg/dm³
1566: mg/m³
1995: customized unit
84 DENSITY_LO_LIMIT Float32 Read Fixed to 0.0
85 DENSITY_HI_LIMIT Float32 Read Fixed to 5000
86 TEMPERATURE 101 Read Media temperature
87 TEMPERA‐
TURE_UNITS
Un‐
signed16
Read /
Write
Temperature unit that is used by temperature values
Coding:
1000: K
1001: °C
1002: °F
1003: °R
88 TEMPERA‐
TURE_LO_LIMIT
Float32 Read Media temperature flow low limit
89 TEMPERA‐
TURE_HI_LIMIT
Float32 Read Media temperature high limit
98 LOW_FLOW_CUT‐
OFF
Float32 Read /
Write
Mass flow low-flow cut-off filter
99 FLOW_DIRECTION Un‐
signed8
Read /
Write
Assigns an arbitrary positive or negative sign to the measured
PV value.
Coding:
0: positive
1: negative
Communication
2.10 Acyclic communication
FCT030 Profibus (From firmware 4.0)
Function Manual, 06/2018, A5E39931906-AB 37
To Next Page
Loading...
