Byte Element Name Description
14…19 General faults and
faults conditions
Sensor element exciter faulty
Error in evaluation electronics
Error in internal energy supply
Error in sensor element
Error in actuator element
Faulty installation e.g. dead space
Parameter setting error
Signal path broken or short cut
Overloading Wrong polarity of aux power
Maximum line length exceeded
Corrosion/abrasion by medium
Fouling on sensor element
Auxil medium missing or insufficient
Wear reserve used up (operation)
Wear reserve used up (wear)
Error in peripherals
Electromag interference too high
Temperature of medium too high
Ambient temperature too high
Vibration/Impact load too high
Auxiliary power range off-spec
Auxiliary medium missing
Excessive temperature shock
Deviation from measurement
Humidity in electronics area
Medium in electronics area
Mechanical damage
Communication error
Foreign material in electro area
Detailed alarm status
23…26 ALARM_STATUS_1 Detailed alarm status information
27…30 ALARM_STATUS_2
31…34 ALARM_STATUS_3
35…38 ALARM_STATUS_4
39…42 ALARM_STATUS_5
43…46 ALARM_STATUS_6
47…50 ALARM_STATUS_7
51…54 ALARM_STATUS_8
55…58 ALARM_STATUS_9
59…62 ALARM_STATUS_10
Communication
2.12 Alarm, error, and system messages
FCT030 Profibus (From firmware 4.0)
Function Manual, 06/2018, A5E39931906-AB 65
To Next Page
Loading...
