To Next PageTo Next PageWhat to do if Siemens SITRANS F US SONOFLO SONO 3000 show no flow signal because error during zero adjustment?
If the Siemens Measuring Instruments show no flow signal, and the unit registers flow in the sensor during zero adjustment, ensure optimum zero adjustment in the sensor.
General| Measurement Principle | Ultrasonic |
|---|---|
| Pressure Rating | Up to 40 bar |
| Power Supply | 24 V DC |
| Housing Material | Aluminum, stainless steel |
| Accuracy | ±1% of reading |
| Temperature Range | -40°C to +200°C |
| Output Signal | 4-20 mA |
| Enclosure Protection | IP67 |
| Process Connection | Flanged |
| Communication | HART |
| Application | Liquids |
| Measurement Range | 12 m/s |
| Lining Material | Not applicable |
| Electrode Material | Not applicable |
