Siemens SITRANS FS130 - HI Precision Mount FST030

4.4 HI Precision mount FST030
Single enclosure Re󹪞ect mount wiring
Connect sensor cables to the sensor as follows:
1. Fill connector end with Super Lube prior to connecting.
2. Apply Super Lube to the internal threads at the large end of the thread connector.
3. Observing the upstream and downstream orientation ③, connect upstream sensor cable ④
from transmitter port (1A) and make connection snug.
Connecting
4.4HI Precision mount FST030
SITRANS FS130 & FS230
42 Compact Operating Instructions, 12/2023, A5E38755607-AF