Siemens SITRANS FS130 - Construction

Table 7-17 Siemens SSL cable capacity
 SSL cables
C
i
264.6pF/m
L
i
1.12µH/m
Table 7-18 Output parameters
 RTD 5, RTD 6 (any combination of con‐
nections)
Sensor outputs, each
(up to 8)
U
o
4.52V DC 17.43V DC
I
o
13.8mA 452mA
P
o
26.6mW 991mW
C
o
• Group IIC
• Groups IIB, III
• Group IIA

• 4.28μF
• 139.5μF
• 994μF

• 169.5nF
• 985nF
• 1000nF
L
o
• Group IIC
• Groups IIB, III
• Group IIA

• 1.87mH
• 7.47mH
• 14.9mH

• 67μH
• 348μH
• 697μH
L
o
/R
o
• Group IIC
• Groups IIB, III
• Group IIA

• NA
• NA
• NA

• 18.0μH/Ω
• 72.2μH/Ω
• 144μH/Ω
Note
External capacitance and inductance
The C
o
and L
o
values already take into consideration the combined e󹪜ects of external
capacitance and inductance. No further reduction of external capacitance and inductance is
required.
7.8 Construction
Table 7-19 Designated use
Description Speci󹪝cation
Measurement of process medium
• Fluid Group 1 (suitable for dangerous 󹪞uids)
• Aggregate state: Paste/light slurry, liquid and gas
Technical speci󹪝cations
7.8Construction
SITRANS FS130 & FS230
104 Compact Operating Instructions, 12/2023, A5E38755607-AF