4. Attach an RTD cable crimp lug on the blue wire ⑤ of the cable by using a crimp tool or
equivalent.
① Wire to Isource + (black) ④ Wire to Vsense - (red)
② Wire to Vsense + (white) ⑤ Wire to ground (blue)
③ Wire to Isource - (green)
5. Ground the RTD cable shield in the external DSL ⑦ by sliding the crimp lug on wire ⑤ onto
one of the installed strain reliefs screws ⑧.
Connecting
4.5Connecting the external DSL
SITRANS FS130 & FS230
Compact Operating Instructions, 12/2023, A5E38755607-AF 51
To Next Page
Loading...
