Installing/Mounting
4
SITRANS F flowmeters with minimum IP65/NEMA 4X enclosure rating are suitable for indoor
and outdoor installations.
● Make
sure
that pressure and temperature specifications indicated on the device nameplate /
label will not be exceeded.
WARNING
Installation in hazardous location
Special
requirements
apply to the location and interconnection of sensor and transmitter. See
Installation in hazardous area (Page 11)
4.1 Installation safety precautions
WARNING
High pressure hazard
In applications
with working pressures/media that can be dangerous to people, surroundings,
equipment or others in case of pipe fracture, we recommend that special precautions such
as special placement, shielding or installation of a pressure guard or a safety valve are taken
when the flowmeter is mounted.
Note
Install the sensor in well-supported pipelines in order to support the weight of the flowmeter.
19
www.eltra-trade.com
i
nfo@eltra-trade.com
+421 552 601 099
To Next Page
Loading...
