EasyManua.ls Logo

Siemens SITRANS MAG 1100 - Rated Operating Conditions; Temperature Shock

Siemens SITRANS MAG 1100
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.2 Rated operating conditions
Table 8-2
Ambient temperatures
1
Version MAG 1100 MAG 1100 HT MAG 1100 F
Standard Sensor -40 to +100 ºC (-40 to +212 °F) -40 to +100 ºC (-40 to +212 °F) -40 to +100 ºC (-40 to +212 °F)
Ex Sensor -20 to +60 ºC (-4 to +140 °F) -20 to +60 ºC (-4 to +140 °F) -20 to +60 ºC (-4 to +140 °F)
With compact
transmitter
MAG
5000/6000
-20 to +60 ºC (-4 to +140 °F) -20 to +60 ºC (-4 to +140 °F)
MAG 6000 I -20 to +60 ºC (-4 to +140 °F) -20 to +60 ºC (-4 to +140 °F)
MAG 6000 I
Ex de
-10 to +60 ºC (+14 to +140 °F) -20 to +60 ºC (-4 to +140 °F)
1
Conditions also dependent on liner characteristiques
Table 8-3
Media temperature
Version MAG 1100 MAG 1100 HT MAG 1100 F
Ceramic -20 to +150 °C (-4 to +302 °F)
MAG 1100 Ex
-20 to +150 °C (-4 to +302 °F)
-20 to +200 °C (-4 to +392 °F)
MAG 1100 Ex
-20 to +180 °C (-4 to +356 °F)
-20 to +150 °C (-4 to +302 °F)
MAG 1100 Ex
-20 to +150 °C (-4 to +302 °F)
PFA -30 to +130 °C (-22 to +266 ºF)
Suitable
for steam sterilization at
150 °C (302 °F)
-30 to +130 °C (-22 to +266 ºF)
Suitable for steam sterilization at
150 °C (302 °F)
8.3 Temperature shock
Table 8-4
Temperature shock
Version MAG 1100 MAG 1100 HT MAG 1100 F
Ceramic
Duration
≤ 1 min,
followed by 10
min rest
DN 2 and 3 (1/12 " and 3/8"):
No limitations
DN 6, 10, 15 and 25:
Max ΔT ≤ 80 °C/min
(1/4", 3/8", ½" and 1":
Max ΔT ≤ 144 °F/min)
DN 40, 50 and 65:
Max ΔT ≤ 70 °C/min
(1½", 2", and 2½":
Max ΔT ≤ 126 °F/min)
DN 80 and 100:
Max ΔT ≤ 60 °C/min
(3" and 4": Max ΔT ≤ 108 °F/min)
DN 15 and 25:
Max ΔT ≤ 80 °C/min
(½" and 1": Max ΔT ≤ 144 °F/min)
DN 40 and 50:
Max ΔT ≤ 70 °C/min
(1½" and 2":
Max ΔT ≤ 126 °F/min)
DN 80 and 100:
Max ΔT ≤ 60 °C/min
(3" and 4": Max ΔT ≤ 108 °F/min)
DN 10, 15 and 25:
Max. ΔT ≤ 80 °C/min
(3/8”, ½” and 1”:
Max. ΔT ≤ 144 °F/min)
DN 40, 50 and 65:
Max. ΔT ≤ 70 °C/min
(1½”, 2” and 2½”:
Max. ΔT ≤ 126 °F/min)
DN 80 and 100:
Max. ΔT ≤ 60 °C/min
(3”, 4”: Max. ΔT ≤ 108 °F/min)
PFA Max. ±100 °C (210 °F)
momentarily
Max. ± 100 °C (212 °F)
momentarily
Technical data
8.3 Temperature shock
50
www.eltra-trade.com
info@eltra-trade.com
+421 552 601 099

Related product manuals