Nominal size DN L
1)
EN 1092-1-201
EPDM Graphite PTFE (Teflon) Without gasket Grounding ring
25 1 80 3.15 81 3.19 85 3.35 79 3.10 92 3.62
40 1½ 95 3.74 96 3.78 100 3.94 94 3.70 107 4.21
50 2 105 4.13 106 4.17 110 4.33 104 4.05 117 4.61
65 2½ 130 5.12 131 5.15 135 5.31 129 5.05 142 5.60
80 3 155 6.10 156 6.14 160 6.30 154 6.00 167 6.57
100 4 185 7.28 186 7.31 190 7.48 184 7.20 197 7.76
1)
When earthing flanges are used, the thickness of the earthing flange must be added to the built-in length
1/2" thread
6 x M4
52 (2.05)
35 (1.38)
20 (0.79)
L
Figure 8-1 MAG 1100 with adapters
The MAG 1100 DN 2, 3, 6 and 10 (1/12“, 1/8“, ¼” and 3/8”) are prepared for assembly with
the ½” pipe connections. Dimensions in mm (inch) The length “L“ varies dependent on the
gasket choice.
Stainless steel and Hastelloy pipe connections PVDF pipe connec‐
tions
Without gasket EPDM Graphite PTFE PTFE
mm inch mm inch mm inch mm inch mm inch
150 5.9 150 5.9 152 6.0 156 6.1 133 5.2
Technical data
8.11 Dimensions and weight
59
www.eltra-trade.com
info@eltra-trade.com
+421 552 601 099
To Next Page
Loading...
