SITRANS P DS III/P410 (7MF4.33.. 7MF4.34.. 7MF4.35..)
16 A5E03434626-04, 05/2015
Fastening
Fastening without the mounting bracket
You can fasten the pressure transmitter directly to the process connection.
Fastening with the mounting bracket
You can fasten the mounting bracket as follows:
● On a wall or a mounting frame using two screws
● On a vertical or horizontal mounting tube (Ø 50 to 60 mm) using a tube bracket
Fasten the pressure transmitter mounting bracket using the two screws provided.
Figure 3-1 Fastening the pressure transmitter on the mounting bracket
To Next Page
Loading...
