SITRANS P DS III/P410 (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-04, 05/2015
47
Rated conditions for absolute pressure (from the differential pressure series), differential pressure and flow rate
Measuring cell with inert liquid
-20 … +100 °C (-4 … +212 °F)
• Measuring cell
-20 … +85 °C (-4 … +185 °F)
In conjunction with dust
-20 … +60°C (-4 … +140°F)
Rated conditions for level
• Installation instruction
specified through the flange
•
Note Observe the allocation of the max. permissible operating temperature to the max.
permissible operating pressure of the relevant flange connection.
Measuring cell with silicone oil
-40 … +85 °C (-40 … +185 °F)
-30 … +85 °C (-22 … +185 °F)
-50 … +85 °C (-58 … +185 °F)
•
•
Degree of protection in
accordance with EN 60529
IP66
• Degree of protection in
NEMA 4X
•
Electromagnetic compatibility
Interference emission and
In accordance with EN 61326 and NAMUR NE 21
Process medium conditions
•
Measuring cell with silicone oil
filling
• Plus side: See mounting flange
•
Low-pressure side: -40 … +100 °C (-40 … +212 °F)
Construction for gauge pressure and absolute pressure (from the gauge pressure series)
Approx. 1.5 kg (3.3 lb) for aluminum enclosure
• Wetted parts materials
Stainless steel, mat. no. 1.4404/316L or Hastelloy C4, mat. no. 2.4610
Stainless steel, mat. no. 1.4404/316L
Stainless steel, material no. 1.4404/316L or Hastelloy C276, material no. 2.4819
• Non-wetted parts materials
Electronics housing
• Copper-free die cast aluminum GD-AlSi 12 or precision cast stainless steel,
mat. no. 1.4408
• Standard: Powder coating with polyurethane
Option: 2 coats: Coat 1: epoxy-based; coat 2: Polyurethane
•
Stainless steel nameplate
To Next Page
Loading...
