Siemens SITRANS P series - Installation Environment and Mounting; Hot Surfaces and External Stresses; Installation Location Requirements; Proper Mounting Procedures

PROFIsafe
1.7 PROFIsafe Commissioning
SITRANS P, DS III PROFIsafe series
1-8 Supplement to Operating Instructions, 03/2006, A5E00732533-01
4. If you must change other parameters, then parameterize them.
5. Press the "Download to device" button.
Result
The device has activated the PROFIsafe functionality. The relevant menus for PROFIsafe
commissioning are active in SIMATIC PDM.
1.7.2 Commission PROFIsafe with SIMATIC PDM
Figure 1-2 "PROFIsafe Commissioning" menu
Start PROFIsafe Commissioning
1. Click on "Device > PROFIsafe Commissioning > Start PROFIsafe Commissioning" in the
menu bar.
The "Start PROFIsafe Commissioning" dialog box is opened.