Nameplate with approval information
The nameplate with approval information is located on the front of the enclosure.
Examples
D
E
F
,,*([LD,,&77*D*E
H
G
1a Characteristics of the hazardous area
1b Type of protection
1c Group (gas, dust)
1d Maximum surface temperature (temperature class)
1e Device protection level
Figure 2-1 Example ATEX
Figure 2-2 Example FM
Nameplate with information on the remote seals
The nameplate with information on the remote seals is located on the back of the enclosure.
Introduction
2.6 Nameplate layout
SITRANS P320/P420
12 Compact Operating Instructions, 01/2021, A5E38874562-AC
To Next Page
Loading...
