Siemens SITRANS P - Installation (Level)

Mount the pressure transmitter as follows:
Example 2: Pipe mounting of pressure transmitter (di󹪜erential pressure series)
The mounting bracket for the di󹪜erential pressure series includes, among other things:
• 4 screws
• One pipe clamp with nuts
• Washers
You can then mount the pressure transmitter in di󹪜erent positions:
4.4 Installation (level)
Notes
Operating data
• Compare the operating data with the data on the nameplate of the pressure transmitter.
• Observe the minimum and maximum permissible ambient and medium temperature limits
also under the in󹪞uence of convection and heat radiation.
Installing/mounting
4.4 Installation (level)
SITRANS P320/P420
28 Compact Operating Instructions, 01/2021, A5E38874562-AC