Getting started
1
Before you commission the device, observe the following safety notes:
• General safety notes (Page 15)
• Basic safety notes: Installing/mounting (Page 21)
• Basic safety notes: Connecting (Page 35)
• Basic safety notes: Commissioning (Page 43)
Read the entire device manual to achieve the optimum performance of the device.
Procedure
1. Install the device.
Installation (level) (Page 28)
Installation (except level) (Page 25)
2. Connect the device.
Connecting the device (Page 39)
3. Switch on the supply voltage.
Switching on the supply voltage (Page 41)
4. If you want to change the factory settings, congure the device using the local or the remote
operation.
– Read the operating instructions for information on this.
5. Lock the device.
– Read the operating instructions for information on this.
SITRANS P320/P420
Compact Operating Instructions, 01/2021, A5E38874562-AC 7
To Next Page
Loading...
