Siemens SIWAREX WP321 Manual

Scale parameters and functions
8.3 DR 3 calibration parameters
SIWAREX WP321
Manual, 07/2014, A5E33715669A-02
47
Variable
Note
Type
Length
(bytes)
Rw
Default
Min.
Max.
0, 1, 2
(Page 49)
Calibration digits 0 determined dur-
ing calibration with calibration weight
0
FLOAT 4 rw 0 -3 999 999 +3 999
999
Calibration digits 1 determined dur-
ing calibration with calibration weight
1
FLOAT 4 rw 2 000 000 -3 999 999 +3 999
999
Calibration digits 2 determined dur-
ing calibration with calibration weight
2
FLOAT 4 rw 0 -3 999 999 +3 999
999
Scale interval
(Page 49)
1)
Weighing range1 scale interval
(1*10**k, 2*10**k, 5*10**k]; k: -3 …
2)
FLOAT 4 rw 0,1 0.001 50
Reserve Bit 1: Reserve BIT 2 rw 0 0 1
Reserve Bit 2: Reserve BIT 0 rw 0 0 1
Automatic
zero adjust-
ment
(Page 49)
Autom. zeroing device
(zero tracking device)
0: Autom. zeroing off
1: Autom. zeroing on
BIT 0 rw 0 0 1
Reserve (13
bits)
Bit 3: Reserve BIT 0 rw 0 0 1
Decimal
places for
process
values
(Page 49)
0: No rounding
1: Rounding to 1 decimal place
2: Rounding to 2 decimal places
3: Rounding to 3 decimal places
4: Rounding to 4 decimal places
5: Rounding to 5 decimal places
6: Rounding to 6 decimal places
USHORT 2 rw 0 0 6
Maximum
tare load
(Page 49)
Range of subtractive tare unit
[in % of max. weighing range ]
FLOAT 4 rw 0 0 250
Reserve Reserve FLOAT 8 rw 1,0 0 100.0
Maximum
negative
zeroing limit
(Page 50)
Negative range of semi-automatic
zeroing device [in % of max. weigh-
ing range]
FLOAT 4 rw 1 0 100.0
Maximum
positive ze-
roing limit
(Page 50)
Positive range of semi-automatic
zeroing device [in % of max. weigh-
ing range]
FLOAT 4 rw 3,0 0 100.0
Standstill
range
(Page 51)
Standstill range (in d) FLOAT 4 rw 0,1 0 maximum
number
range+
Standstill
time
(Page 51)
Standstill time 1 in ms TIME 4 rw 2 000 10 10 000

Siemens SIWAREX WP321 Specifications

General

Brand	Siemens
Model	SIWAREX WP321
Category	Accessories
Language	English