Scale parameters and functions
8.15 DR 32 Message display
SIWAREX WP321
Manual, 07/2014, A5E33715669A-02
81
In these areas, messages are represented by bits. A set bit means that the corresponding
message is activated. The message bit is set following a data or operator error and
automatically reset approximately 3 seconds later.
Message bits are analyzed by the operator panel message system.
The data/operator errors (error numbers 1xxx) are present in the first two bytes. These are
followed by two bytes with technology errors (error numbers 2xxx) and six bytes with data
and operator errors (error numbers 5xxx and 7xxx).
To Next Page
Loading...
