Siemens SIWAREX WP321 Manual

Scale parameters and functions
8.13 DR 30 current process values
SIWAREX WP321
Manual, 07/2014, A5E33715669A-02
75
Variable
Note
Type
L
Rw
Default
Min.
Max.
Reserve (5
bits)
BIT 0 r 0 - -
DS32 error
status change
Is set interface-specific with
each DS32 change
BIT 2 r 0 - -
Reserve (7
bits)
BIT 0 r 0 - -
Calibrated SIWAREX is calibrated BIT 0 r 0 - -
Service mode Service mode is enabled BIT 0 r 0 - -
Reserve (3
bits)
BIT 0 r 0 - -
SIMATIC
connection
inactive
Set if no connection to the
SIMATIC exists on the part of
the application
BIT 0 r 0 - -
Startup Startup has taken place (is
deleted again after 5 sec-
onds)
BIT 0 r 0 - -
Fault status Operating fault BIT 0 r 0 - -
Gross process
weight
(Page 76)
Gross weight (process value) FLOAT 4 r 0 - -
Net process
weight
(Page 76)
Net weight (process value) FLOAT 4 r 0 - -
Tare process
weight
(Page 76)
Tare weight (process value) FLOAT 4 r 0 - -
Gross / net
weight
(Page 76)
Gross or net weight FLOAT 4 r 0 - -
Gross / net
weight with
increased
resolution (x
10) (Page 76)
Legal trade G/N weight with
10x resolution
FLOAT 4 r 0 - -
Refresh coun-
ter for process
values
(Page 76)
Refresh counter incremented
by 1 if weight values have
been changed
USHORT 2 r 0 - -
Operating time
(hours)
Total operating time of the
module (hours)
USHORT 2 r 0 - -
Operating time
(minutes)
Total operating time of the
module (minutes)
USHORT 2 r 0 - -
Reserve 3 Reserve FLOAT 4 r 0 - -

Siemens SIWAREX WP321 Specifications

General

Brand	Siemens
Model	SIWAREX WP321
Category	Accessories
Language	English