System Description Scan Unit (Gantry)
0.0
04/2012
0.0
B.2-9
0.0
B
.2
B
Press one key for motion control only at a time.
B.2
The operating elements illustrated on the left margin in follow-
ing pages are from right gantry panel. You can use the operating
elements on the left gantry panel as well.
B.2
Gantry tilt
B.2
B.2
With the two keys, you can tilt the gantry up to +/- 25º from the
vertical position (0) depending on the table height.
B.2
Table movements
B.2
B.2
With the four table adjustment keys, you can adjust the table
height and move the table into and out of the gantry.
B.2
To Next Page
Loading...
