0.0
0.0
Scan Unit (Gantry) System Description
B.2-10 SOMATOM Spirit
0.0
Predefined table position
B.2
B.2
With the keys A and B, you can move the table to two predefined
positions.These positions can be preset, for more information
please refer to (→ Page C.2-7 Moving to the predefined table
position)
B.2
Laser light marker
B.2
B.2
With this key, you switch the laser light marker on and off. The
laser light marker indicates the position of the scan center and
the slice plane in the middle of the detector rows.
B.2
i
.2
B
After approximate 1 minute, the laser light marker is switched
off automatically.
B.2
Tabel retraction
B.2
B.2
With this key, you move the table top out of the gantry opening
and lower it. The key is active as long as it is pressed. The patient
can then leave the table.
B.2
i
.2
B
The gantry is automatically set vertical first, if the gantry tilt dif-
fers from 0.
B.2
To Next Page
Loading...
